The saddle bar stool has become an important piece of furniture not only in bars but at home as well. The stool is available in a variety of designs and colors. Making your own saddle seat bar stool can create your creative style. Wood is the material used for these stools. As their seats are often much wider to allow for comfort, saddle bar stools are unique from other bar stools. To make this stools, starting with decision on stool design; you can make your saddle bar stool out of maple or lighthouse. But the best material to use because it is relatively strong and not very expensive.
Decide on the ideal height of the setting you have in mind. The height of the saddle bar should be compatible with the height of the counter. Choose your seat design. There is also the possibility to make your seat with a back. Step 2, start making the bar stool seats; put faces parts and work tools within your reach. Start collecting the pieces that will do it again. Take the upper and lower back bars and customize them. Assemble the shelves and insert one by one into the top bar. Then the bottom bar and adjust its holes with the planks. Put the planks in the holes at once.
24 Photos Gallery of: To Make Saddle Seat Bar Stool
Step 3, collect the bund; after the back is finished, pick up the 2 hind legs of your saddle bar stool and insert one of the side boards in one of the legs. Take the upper plank to the hind leg. Which has a knob to attach the back of the stool and attach it to the same leg with a side plank? Take the other back leg, adjust its hole to the side shelf, and push them together. Assemble the forelegs and side planks and repeat the above procedure. When the 2 front legs are tied together using the side boards, assemble the front and rear legs using the remaining planks.
Place the planks in the hind legs. And right the holes in the front leg assemble with the planks and push them together at once. Step 4, connect all parts; collect it already assembled the back of your bucket bar stool and finds the holes in the bottom plank of stools back. Put glue inside the holes. Trace the handles on the hind plank. Align them with the glued holes, and lock them in. Step 5, connect seat; with your frame well assembled and fixed, pick up the saddle bar stool seat and put it on the frame. Finish the saddle bar by tightening the seat on the frame.